Skip to content

PRO-MAT, MALE SNAPS , 23-1/2 X 35-1/2 X 1/16 IN

Price :

$20.05

  • In stock – will ship in 3 days or less
  • Solid fiberboard construction with a buried conductive layer
  • Includes two installed 3/8″ stud snaps – socket snaps available
  • Resists damage by hot soldering irons, solder, or flux
  • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
  • Thickness: 0.060″ (1.5mm)
  • Lead-free RoHS compliant
  • Made in the United States of America

“The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

DATA SHEET

SKU 37676 Category
  • In stock – will ship in 3 days or less
  • Solid fiberboard construction with a buried conductive layer
  • Includes two installed 3/8″ stud snaps – socket snaps available
  • Resists damage by hot soldering irons, solder, or flux
  • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
  • Thickness: 0.060″ (1.5mm)
  • Lead-free RoHS compliant
  • Made in the United States of America

“The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

DATA SHEET

Weight 2 lbs

Related products

  • Pro Mats

    PRO-MAT, FEMALE SNAPS 23-1/2X47-1/2X1/16 IN

    $24.58     Add to cart

    PRO-MAT, FEMALE SNAPS 23-1/2X47-1/2X1/16 IN

    $24.58

    SKU: 39796 Category:
    • In stock – will ship in 3 days or less
    • Solid fiberboard construction with a buried conductive layer
    • Includes two installed 3/8″ stud snaps – socket snaps available
    • Resists damage by hot soldering irons, solder, or flux
    • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
    • Thickness: 0.060″ (1.5mm)
    • Lead-free RoHS compliant
    • Made in the United States of America

    “The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

    DATA SHEET

  • Pro Mats

    PRO-MAT, MALE SNAPS 23-1/2 X 59-1/2 X 1/16 IN

    $28.60     Add to cart

    PRO-MAT, MALE SNAPS 23-1/2 X 59-1/2 X 1/16 IN

    $28.60

    SKU: 37675 Category:
    • In stock – will ship in 3 days or less
    • Solid fiberboard construction with a buried conductive layer
    • Includes two installed 3/8″ stud snaps – socket snaps available
    • Resists damage by hot soldering irons, solder, or flux
    • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
    • Thickness: 0.060″ (1.5mm)
    • Lead-free RoHS compliant
    • Made in the United States of America

    “The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

    DATA SHEET

  • Pro Mats

    PRO-MAT, MALE SNAPS , 11-3/4 X 59-1/2 X 1/16 IN

    $20.05     Add to cart

    PRO-MAT, MALE SNAPS , 11-3/4 X 59-1/2 X 1/16 IN

    $20.05

    SKU: 37672 Category:
    • In stock – will ship in 3 days or less
    • Solid fiberboard construction with a buried conductive layer
    • Includes two installed 3/8″ stud snaps – socket snaps available
    • Resists damage by hot soldering irons, solder, or flux
    • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
    • Thickness: 0.060″ (1.5mm)
    • Lead-free RoHS compliant
    • Made in the United States of America

    “The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

    DATA SHEET

  • Pro Mats

    PRO-MAT, FEMALE SNAPS 11-3/4 x 35-1/2 x 1/16

    $15.40     Add to cart

    PRO-MAT, FEMALE SNAPS 11-3/4 x 35-1/2 x 1/16

    $15.40

    SKU: 39780 Category:
    • In stock – will ship in 3 days or less
    • Solid fiberboard construction with a buried conductive layer
    • Includes two installed 3/8″ stud snaps – socket snaps available
    • Resists damage by hot soldering irons, solder, or flux
    • RTT of top and bottom layers: 1 x 106 to < 1 x 109 ohms – meets worksurface recommendation of ANSI/ESD S4.1
    • Thickness: 0.060″ (1.5mm)
    • Lead-free RoHS compliant
    • Made in the United States of America

    “The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point.” ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. “If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms.” “Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration.” (Ref: TR 20.20 section 5.3.1).

    DATA SHEET

    • Do you have a Question or Concern?

    "*" indicates required fields

    Name*
    This field is for validation purposes and should be left unchanged.