Metal-Out Static Shielding Bags

SCC 1500 Metal-Out Static Shielding Bag:

Used where device sensitivity to charge retention is the primary consideration. Provides low charge retention and fast discharge by placing the metal layer near the outer surface. Complies with MIL-PRF-81705D, EIA 625, EIA 541, ANSI/ESD S-20.20.

 

 

SCC 1500 Standard Sizes (Open Top) (All Bag Sizes are Inside Dimensions in Inches)
W x L	W x L	W x L	W x L
3 x 5	7 x 15	10 x 14	14 x 18
4 x 6	8 x 10	10 x 24	15 x 18
5 x 8	8 x 12	11 x 15	16 x 24
6 x 8	9 x 12	12 x 16	18 x 18
6 x 10	10 x 12	12 x 18	18 x 24
6 x 30
SCC 1500 Standard Sizes (Zip Top) (All Bag Sizes are Inside Dimensions in Inches)
W x L	W x L	W x L	W x L
3 x 5	5 x 8	6 x 10	10 x 12
4 x 4	6 x 8	8 x 10	12 x 18
4 x 6
All standard sizes in-stock/same-day shipment (minimum order quantities may apply) Width is measured from inside seam to inside seam. The opening is the 'width' dimension. The length is measured from the top edge to bottom fold on the open-top bags, and from the bottom of the zipper to the bottom fold on zip-top bags. Custom bag sizes, custom printing, and custom hot stamping are available.

Also see our SCC 1000 Metal-In Static Shielding Bag
and the SCC 1000 Metal-In Zip-Top Static Shielding Bag